Single Pivoting Panel or Pivot + Fixed Return
Common layouts include a single pivoting panel with a fixed return, a pivoting door set in a wide alcove, and a pivoting door as the entry on an oversized curbless walk-in.
A pivot shower door rotates on a top-and-bottom pin assembly: one pin seats into the header (a ceiling-mounted bracket or wall-spanning header), and a second pin seats into the curb or floor.
Because the load travels vertically through those two pins rather than concentrating on side-mounted hinges, a pivot configuration carries heavier glass than a hinged door of the same size.
Common layouts include a single pivoting panel with a fixed return, a pivoting door set in a wide alcove, and a pivoting door as the entry on an oversized curbless walk-in.
Most pivot enclosures are built in 3/8" tempered heavy glass; 1/2" tempered is common on pivots specifically because side-mounted hinges typically max out at 3/8" before overloading the wall connection.
Hardware comes from CRL (C.R. Laurence), with floor and ceiling pin assemblies, handles, and finish options sized to the panel. Pin tension is checked at the final walkthrough and can be adjusted later if needed.
Configurations include single inward-swing, single outward-swing, and bi-directional swing where the door rotates freely in both directions for accessibility or wider walk-in entry.
Pivot enclosures work best in larger primary baths and contemporary architecture where the bi-directional swing has room to operate. Common layouts include a single pivoting panel with a fixed return, a pivoting door set in a wide alcove, and a pivoting door as the entry on an oversized curbless walk-in.
Because the floor and ceiling pins must seat precisely, every pivot project starts with on-site templating: we measure the actual opening, confirm the header and curb conditions, and fabricate the panel to those exact dimensions in our Northern Colorado shop.
Custom pivot shower enclosures install in 1–2 weeks from approved measurement, vs. 2–3 weeks for vendors who outsource heavy-glass fabrication out of state. Pivot doors carry a small bi-directional gap at the swing edge, so we install water sweeps, drip rails, and edge seals as standard practice on every pivot job.
Squeegee the glass after every use to keep water spotting and soap film off the panel.
Clean with a non-abrasive glass cleaner and skip anything ammonia-based to protect the glass and pin hardware.
Have the pivot pin tension checked periodically; it's adjusted at the final walkthrough and can be tuned later if needed.
Consider an optional factory-applied Diamon-Fusion hydrophobic coating for hard-water defense on the Front Range.
A pivot shower door swings on top and bottom pins mounted to the header and the curb or floor, while a hinged door swings on side-mounted hinges. Pivot configurations can be built to swing both inward and outward and accommodate heavier glass; hinged doors swing one direction and seal tightly at the hinge edge. Moffat fabricates both styles in-house in Northern Colorado.
Custom pivot shower doors are typically fabricated in 3/8" or 1/2" tempered heavy glass. The 1/2" option is more common on pivot than on hinged doors because the floor and ceiling pin mechanism distributes the panel weight vertically through the pins rather than concentrating it on side-mounted hinges, which usually max out at 3/8" before overloading the wall connection. Final thickness depends on the panel size, the configuration, and the bathroom layout.
Custom pivot shower doors price above standard side-hinged frameless doors because pivot hardware (floor and ceiling pin assemblies) and the heavier-glass option add fabrication and material cost. Final cost depends on glass thickness (3/8" or 1/2"), panel size, configuration, hardware finish, and whether a factory coating is added, so every quote is project-specific.
Moffat installs most custom pivot shower doors in 1–2 weeks from approved measurement. Vendors who outsource heavy-glass fabrication out of state typically run 2–3 weeks; we temper and finish every pivot panel locally. Install day itself is usually a single day once the glass arrives.
Two-panel frameless heavy-glass enclosure that meets at a right angle in the bathroom corner, fabricated to the actual room geometry.
View Style →Shower StyleSliding heavy-glass shower door on an exposed top-rail with visible rollers, designed as an architectural feature for modern-farmhouse and industrial baths.
View Style →Shower StyleFactory-applied hydrophobic and oleophobic glass coating that chemically bonds to shower glass, repelling water, soap scum, and hard-water mineral buildup.
View Style →Shower StyleHeavy-glass enclosure with one or two panels gliding on a top track — no perimeter frame and no swing-clearance footprint for tight bathrooms.
View Style →Shower StyleFrameless heavy-glass enclosure with applied or integrated black-metal grid mullions in a Crittall-window aesthetic for industrial and loft baths.
View Style →Shower StyleTraditional frameless heavy-glass swing door on side-mounted hinges, giving the widest unobstructed opening of any frameless style.
View Style →Since 1921, Moffat Glass has built custom heavy-glass enclosures across Northern Colorado, fabricated and tempered in-house at our shop in Evans. A pivot shower door is one of the cleanest statement entrances a primary bath can carry, and we build each one to the panel size, glass thickness, and hardware spec the project calls for.
Awesome company, quick response time, and friendly people!
"Our business main window glass broke in the morning as we were coming in, Moffat was called and they replaced the glass the same day. Awesome company, quick response time, and friendly people!"
I am so happy with my finished job!
"I am so happy with my finished job! They did amazing and were very responsive with any questions or issues that came up. Amber was absolutely phenomenal! She was right on top of everything and making sure that I was satisfied."
Thank you
"Rene did an amazing job with a huge, double pane window on our porch. He was courteous, professional, and took the time to answer all my questions. He put everything back in place perfectly when the job was complete. I appreciate his dedication to duty and craftsmanship. Thank you."
Highly recommend the company.
"From the people on the phone to the service technician, everyone was courteous and professional. Everything went exactly as was told me. The service technician, Daniel, was extremely pleasant and knowledgeable. He did a terrific job. Highly recommend the company."
Moffat has delivered!
"Absolutely love Moffat Glass. We have worked with them for over 20 years and have always received great customer services and quality install on our items—from creating a new glass table top for our living room coffee table, to updating all our house screens, to installing screens and storm windows on our wrap-around porch, Moffat has delivered!"
We've used Moffat Glass in the past and will continue our loyalty to them based on their high quality service and products.
"JR and Anthony installed our shower doors and they look AWESOME!! They were timely, friendly, thorough, clean and took time to explain how to care for shower doors. We are very pleased with the service from Moffat Glass. It was exactly 3 weeks from the time we called in to have someone come measure to having the doors installed. We've used Moffat Glass in the past and will continue our loyalty to them based on their high quality service and products."
Thank you guys for your nice work!
"Anthony and Jr did an awesome job! They are very professional and get the work done quick while leaving it looking nice. We are very happy with the glass they put in our shower. It definitely was the missing piece and now it is complete! Thank you guys for your nice work!"
We are very happy with Moffat Glass
"We wanted to let everyone know that Anthony & Junior did an Amazing job on installing our shower door. The workmanship was great. Very professional. We love our shower door. They took the time to tell us how to clean the door. We are very happy with Moffat Glass. Thank you Amber for all your help with our shower door. David & Linda"
I do not hesitate to recommend Moffat Glass
"We needed our patio screen door replaced. Moffat answered the phone (something that 3 other businesses did not do), scheduled someone to come measure the same day, manufactured our non-standard sized door and installed it within a week. We have yet to hear from the other businesses we contacted who told us they would 'get right back' to us. The quality of customer service was very good. Everyone was friendly, professional, and expressed appreciation for our business. I do not hesitate to recommend Moffat Glass. They have been in Greeley for a long time and I can see why they have lasted."
I will absolutely be using Moffat again and I highly recommend them!
"I'm very thankful to have worked with Moffat glass. I needed a large piece of glass for my hotel with special cuts and Moffat nailed it perfectly! The installers are very careful and did an amazing job. Amber was the one always taking my phone calls and she is a pleasure to work with. Very knowledgeable and patient. I will absolutely be using Moffat again and I highly recommend them!"
Thank you Moffat, for another job well done.
"Anytime I have a project that requires a skill level greater than I can provide, I call Moffat. I've relied on them for many years. They're always on time and always get the job done in a most efficient manner. The workmanship is always second to none. Thank you Moffat, for another job well done."
I highly recommend Moffat Glass!
"Anthony and John did a great job installing our shower frame and glass! They answered my questions before starting their work. We thoroughly enjoyed working with Moffat Glass. Amber was a great help on the phone and took the time to answer my questions and concerns. I highly recommend Moffat Glass!"
Ready for expert glass solutions for your home or business? Moffat Glass has been proudly serving Evans, Loveland, and Fort Collins. Fill out the form below or give us a call for your free estimate!