A dining table is rarely a round number, a coffee-table outline is not standardized, and the console-table base almost never matches a stock 24-by-60 catalog size. A custom-cut top is templated to those actual conditions, so the glass meets the table edge cleanly, sits even on every side, and matches any inherited corner radius rather than leaving an overhang gap. A protective overlay keeps the wood grain or stone veining underneath on full display while the glass takes the daily wear, scratches, heat marks, and water rings. Every Moffat full-surface top is tempered for safety, with edge work in flat-polished, beveled, ogee, or pencil-polished finishes. Because we template, cut, temper, edge, deliver, and place the glass locally, the buyer is not stuck unboxing a flat sheet from a national shipper. See how our in-house glass shop works.
On the new-cut side, protective overlay tops are the highest-volume residential category, templated for existing wood or stone dining, coffee, console, side, desk, dresser, and sideboard tops where the grain stays visible under the glass. Full-glass dining tables are cut to the table base footprint with appropriate overhang, in 3/8-inch or 1/2-inch tempered depending on span and load. Full-glass console and entry tables run as slim tops on metal or stone bases, often spec'd alongside custom cut mirror and glass shelving on the same project. Custom-fit insert glass for furniture restoration drops into the rabbet of an antique buffet, secretary desk, or vintage sideboard, the natural bridge into our decorative and specialty glass scope. Outdoor and patio tabletop work covers covered patios and sunrooms, with umbrella-hole cutouts drilled to template. Every new-cut piece is cut, tempered, edged, and finished in our Northern Colorado shop.
On the repair side, our tabletop work covers damaged or cracked top replacement (a new same-size, same-edge, same-thickness piece cut to the original) and aged-top refresh that swaps a builder-grade glass top for custom-cut tempered glass with premium edge work.
Three thicknesses cover most residential tabletop work. 1/4-inch tempered is the standard for protective overlays. 3/8-inch tempered is the right call for full-surface dining tables, console tables, and large-format overlays where rigidity matters. 1/2-inch tempered carries the longest spans and heaviest-duty dining. Every Moffat full-surface top is tempered for safety, the standard for residential tabletops. Edge work runs to four finishes: flat-polished for the clean modern default, beveled for the traditional reflective angle, ogee for the high-end S-curve profile designers favor on dining and console work, and pencil-polished for the soft rounded reveal common on modern interiors. Placement methods include rubber bumpers or silicone dots for overlays, direct-set on the base for full-glass dining, seating in a furniture rabbet for restoration work, or floating slab style for console tables. Corner radii and umbrella-hole cutouts are cut to template.
Dining rooms carry the heaviest tabletop work, from protective overlays on wood or stone tables to full-glass dining tables on metal bases. Living rooms add coffee-table overlays and console tables. Entries run console tops and entry-styling glass. Home offices cover desk-top overlays and full-glass desk tops. Bedrooms and dressing rooms run dresser, vanity, and side-table overlays that often come up alongside custom cut mirror work. Older homes across Greeley, Loveland, and Fort Collins are where furniture-restoration insert glass and protective overlays on inherited wood furniture tend to surface, on antique buffets, secretary desks, and vintage sideboards that deserve a custom-cut piece rather than a stock substitute. Light commercial work covers restaurant dining tops, hospitality lobby tops, and conference-room overlays.
We capture existing table dimensions for overlay work, base footprint and overhang preference for full-glass dining and console, rabbet depth for restoration insert, corner-radius, and any umbrella-hole obstructions. Nothing gets cut until the measure is signed off.
Your top is custom-cut, tempered, and edge-worked in our Northern Colorado shop, the same in-house craft we have practiced since 1921. Edge finish, corner radii, and umbrella holes are finished to template before delivery.
Moffat technicians place every top, never subcontracted. The placement method (rubber bumpers, silicone dots, direct-set, furniture rabbet, or floating slab) is selected for the table type, with existing finishes protected throughout.
We check top level, even overhang, edge inspection, non-slip placement, and rabbet-seat fit, and if anything needs adjusting in the first year, the same Moffat team that placed it comes back to make it right.
Since 1921, Moffat has cut, tempered, and finished custom glass tabletops across Northern Colorado, over a century of in-house craft anchored in three locations (Evans HQ, Loveland, and Fort Collins) serving Larimer and Weld County homes. We hold BBB Northern Colorado A+ accreditation and National Glass Association (NGA) membership, plus the Shower Door Professionals Co-op and our local Greeley and Evans Chamber memberships.
Every placement is handled by Moffat technicians, never subcontracted, and we also cut replacement tops for damaged dining, coffee, console, desk, and furniture-restoration insert work, scope many shops will not bother with. Our workmanship warranty is industry-standard, backed by 100+ years of in-house craft.
Glass table top thickness depends on whether the glass is a protective overlay or a full surface, plus span and load. Most residential tabletops use 1/4-inch, 3/8-inch, or 1/2-inch tempered plate. 1/4-inch tempered handles protective overlays on most residential tables, the highest-volume use case across dining, coffee, console, desk, and dresser tops. 3/8-inch tempered is right for full-surface dining tables, console tables, and large-format overlays where rigidity matters. 1/2-inch tempered carries the longest spans, heaviest loads, and large-format dining. Final thickness is selected at the on-site measure based on your table type, span, and intended use. Share your table type and dimensions with your quote request.
Yes. Every Moffat full-surface glass table top is tempered, which is about four times stronger than annealed glass. Tempered glass is heat-treated for strength, and if it ever does break under extreme impact, it crumbles into small granular pieces rather than sharp shards, the standard safety spec for any residential tabletop. Overlay tops can be tempered or annealed. Tempered safety is standard on every Moffat full-surface top.
Moffat offers four edge finishes on custom glass table tops: flat-polished, beveled, ogee, and pencil-polished. Flat-polished is the clean modern default. Beveled is the traditional reflective angle, often paired with formal dining sets. Ogee is the high-end S-curve profile favored on designer dining and console work. Pencil-polished is a soft rounded reveal common on modern interiors. Bring inspiration photos to your measure visit.
Most protective overlay tops use rubber bumpers or silicone non-slip dots placed between the glass and the wood or stone surface beneath. Full-glass dining and console tables are direct-set on the table base, with the base designed for the glass top. Furniture-restoration insert glass seats inside a rabbet built into the furniture. Placement method is confirmed at the on-site measure.
Yes. Moffat cuts replacement tops to match the original dimensions, edge finish, thickness, corner radius, and any cutouts. Bring or photograph the damaged top if possible (the cleanest measurement starts from the existing piece) or we template the table base on-site. Replacement work covers dining, coffee, console, desk, dresser, and furniture-restoration insert glass. Photos of the existing top or table base help speed the quote.
Bring custom-cut precision, tempered safety, and premium edge work to your next tabletop project, fabricated in our Northern Colorado shop. Since 1921, Moffat has cut and finished glass tops for the dining tables, coffee tables, consoles, desks, dressers, and furniture-restoration inserts of Larimer and Weld County homes, with delivery and placement handled by the same team that cut the piece. Share your project type, dimensions, and a photo if it is a replacement or restoration insert, and we will scope the work.
Awesome company, quick response time, and friendly people!
"Our business main window glass broke in the morning as we were coming in, Moffat was called and they replaced the glass the same day. Awesome company, quick response time, and friendly people!"
I am so happy with my finished job!
"I am so happy with my finished job! They did amazing and were very responsive with any questions or issues that came up. Amber was absolutely phenomenal! She was right on top of everything and making sure that I was satisfied."
Thank you
"Rene did an amazing job with a huge, double pane window on our porch. He was courteous, professional, and took the time to answer all my questions. He put everything back in place perfectly when the job was complete. I appreciate his dedication to duty and craftsmanship. Thank you."
Highly recommend the company.
"From the people on the phone to the service technician, everyone was courteous and professional. Everything went exactly as was told me. The service technician, Daniel, was extremely pleasant and knowledgeable. He did a terrific job. Highly recommend the company."
Moffat has delivered!
"Absolutely love Moffat Glass. We have worked with them for over 20 years and have always received great customer services and quality install on our items—from creating a new glass table top for our living room coffee table, to updating all our house screens, to installing screens and storm windows on our wrap-around porch, Moffat has delivered!"
We've used Moffat Glass in the past and will continue our loyalty to them based on their high quality service and products.
"JR and Anthony installed our shower doors and they look AWESOME!! They were timely, friendly, thorough, clean and took time to explain how to care for shower doors. We are very pleased with the service from Moffat Glass. It was exactly 3 weeks from the time we called in to have someone come measure to having the doors installed. We've used Moffat Glass in the past and will continue our loyalty to them based on their high quality service and products."
Thank you guys for your nice work!
"Anthony and Jr did an awesome job! They are very professional and get the work done quick while leaving it looking nice. We are very happy with the glass they put in our shower. It definitely was the missing piece and now it is complete! Thank you guys for your nice work!"
We are very happy with Moffat Glass
"We wanted to let everyone know that Anthony & Junior did an Amazing job on installing our shower door. The workmanship was great. Very professional. We love our shower door. They took the time to tell us how to clean the door. We are very happy with Moffat Glass. Thank you Amber for all your help with our shower door. David & Linda"
I do not hesitate to recommend Moffat Glass
"We needed our patio screen door replaced. Moffat answered the phone (something that 3 other businesses did not do), scheduled someone to come measure the same day, manufactured our non-standard sized door and installed it within a week. We have yet to hear from the other businesses we contacted who told us they would 'get right back' to us. The quality of customer service was very good. Everyone was friendly, professional, and expressed appreciation for our business. I do not hesitate to recommend Moffat Glass. They have been in Greeley for a long time and I can see why they have lasted."
I will absolutely be using Moffat again and I highly recommend them!
"I'm very thankful to have worked with Moffat glass. I needed a large piece of glass for my hotel with special cuts and Moffat nailed it perfectly! The installers are very careful and did an amazing job. Amber was the one always taking my phone calls and she is a pleasure to work with. Very knowledgeable and patient. I will absolutely be using Moffat again and I highly recommend them!"
Thank you Moffat, for another job well done.
"Anytime I have a project that requires a skill level greater than I can provide, I call Moffat. I've relied on them for many years. They're always on time and always get the job done in a most efficient manner. The workmanship is always second to none. Thank you Moffat, for another job well done."
I highly recommend Moffat Glass!
"Anthony and John did a great job installing our shower frame and glass! They answered my questions before starting their work. We thoroughly enjoyed working with Moffat Glass. Amber was a great help on the phone and took the time to answer my questions and concerns. I highly recommend Moffat Glass!"
Ready for expert glass solutions for your home or business? Moffat Glass has been proudly serving Evans, Loveland, and Fort Collins. Fill out the form below or give us a call for your free estimate!